Home Projects Group Culture Blog & Ideas Contact Group2

login
Group2 Blog

BARB SCOTT PARK GRAND OPENING

Calgary Studio 12 Jun 2014

An exciting event is happening in Calgary’s downtown community this Friday! The official opening ceremony for the new Barb Scott Park will be held between noon and 1pm on Friday, June 13th at the park’s location of 12th Avenue and 9th Street SW....[ CONTINUE READING ]
An exciting event is happening in Calgary’s downtown community this Friday! The official opening ceremony for the new Barb Scott Park will be held between noon and 1pm on Friday, June 13th at the park’s location of 12th Avenue and 9th Street SW.

We’re sharing this news with you because Group2 appreciates good design and architectural interest, and we like the park! Also, we’re excited it’s within walking distance from our office. As our city continues to grow, so does the need for more vibrancy and outdoor culture. This park will bring a sense of freshness to the Beltline District; Calgarians who live and work in the area will be able to enjoy moments of tranquility throughout their busy days.

The park was named in honor of Barb Scott, a late alderman for the City of Calgary who served on council for 24 years. The central fixture of this park is the incredible sculpture, called ‘Chinook Arc’, which fulfills the need for more public art pieces in the Beltline area. Artists Joe O’Connell and Blessing Hancock from Creative Machines, conceptualized an idea that would relate to our city’s unique weather phenomena and allow for interactive features. Park users will be able to manipulate the lighting sequence with the wave of a hand, bringing the added dimension of light and color. Providing an identity for the park, the Arc is a beautiful compliment to this area and will serve as a source of light for this highly visible location.

Be sure to check out the park this summer and enjoy what the new green space has to offer!
[ CLOSE ]

Chinook Arc
Chinook Arc

Chinook Arc
Chinook Arc

MAKESCAPE JUNE 12-13

Chris vander Hoek 05 Jul 2013

makescape featured a great conversation about urban design and architecture between Mark Sterling (of Sweeny Sterling Finlayson & Co.) and Carol Belanger (Edmonton's city architect). The focus of makescape was on creating a conversation that would be...[ CONTINUE READING ]
makescape featured a great conversation about urban design and architecture between Mark Sterling (of Sweeny Sterling Finlayson & Co.) and Carol Belanger (Edmonton's city architect). The focus of makescape was on creating a conversation that would be accessible to all, allowing participants to get close and make comments and ask questions. The discussion ranged from issues about public consultation and city zoning, to building height and design and contrasts between Edmonton and Toronto.

This discussion was especially timely, as both Toronto and Edmonton are going through signficant building phases. Toronto, where height has become the new norm - new condo buildings are regularly being approved in the 60-80 storey range, and Edmonton, where new recreation and library architecture is creating excitment.

makescape's main design piece included bringing grass tiles and grass areas to centennial Plaza. Other interventions included Urban System's velcro beach ball system, a dj competition by Pixel Blue College and a small market by the Mercer Collective. Additionally, the City of Edmonton was very helpful in providing the space and the great red cafe tables for people to sit!

Group2 donated design time to the June edition of makescape and is sponsoring the Pecha Kucha/makescape in October.

Bringing conversation about design to the public realm is a key part of Designing Downtown; which was started by M.A.D.E in Edmonton, Edmonton's NextGEN and Progress Unlimited. [ CLOSE ]


MakescapeYEG

Edmonton Studio 28 May 2013

Group2 is one of the sponsors for a local Edmonton event at Centennial Plaza [behind Stanley Milner Library], one of Edmonton's inactive public spaces. On June 13th and 14th M.A.D.E. in Edmonton will be intervening in the plaza, humanizing the vastne...[ CONTINUE READING ]
Group2 is one of the sponsors for a local Edmonton event at Centennial Plaza [behind Stanley Milner Library], one of Edmonton's inactive public spaces. On June 13th and 14th M.A.D.E. in Edmonton will be intervening in the plaza, humanizing the vastness of the space through fine-grain elements such as grass, street furniture, installations, and a pop up café. Local groups are invited to bring things such as pop up vendors, food trucks, and performances to the plaza. [ CLOSE ]


Moveable grass tiles to create a dynamic urban environment
Moveable grass tiles to create a dynamic urban environment

streetBrite at illumiNITE

Edmonton Studio 28 Feb 2013

StreetBrite fulfulled it's mandate to be fully interactive. The piece used black light within the board, which lit up the reactive baloons inside repurposed water bottles. The piece seemed to function as a magnet, as everyone who walked by had to at ...[ CONTINUE READING ]
StreetBrite fulfulled it's mandate to be fully interactive. The piece used black light within the board, which lit up the reactive baloons inside repurposed water bottles. The piece seemed to function as a magnet, as everyone who walked by had to at least come up and touch it. Even the after dinner crowd, dressed in high heels and suits were not immune.

the second IllumiNITE was the most successful one yet! Many people enjoyed the balmy evening to take in the light creations. street brite is a piece by Chris and Bobby of g2. [ CLOSE ]


mygloo at illumiNITE

Edmonton Studio 28 Feb 2013

The final Mygloo installation used the surrounding trees as supporting structure for the piece. The translucent canopy invited people to walk underneath, and they did - the space was almost always occupied. One of the most photographed pieces of the ...[ CONTINUE READING ]
The final Mygloo installation used the surrounding trees as supporting structure for the piece. The translucent canopy invited people to walk underneath, and they did - the space was almost always occupied. One of the most photographed pieces of the night, mygloo won third prize from the jury, as well as the peoples choice award.


the second IllumiNITE was the most successful one yet! Many people enjoyed the balmy evening to take in the light creations. mygloo is a creation of Heather, Carly and Olivia of g2 with Amy Wowk. [ CLOSE ]


U of A PAW PROJECT TIME LAPSE

Edmonton Studio 22 Feb 2013

Construction has been underway on the PAW project and a time lapse video has been made by the Faculty of Physical Education to document the progress. Check back to see new footage at a future date as well....[ CONTINUE READING ]
Construction has been underway on the PAW project and a time lapse video has been made by the Faculty of Physical Education to document the progress. Check back to see new footage at a future date as well. [ CLOSE ]


A New Beginning for Architectural Firm

Calgary Studio 19 Feb 2013

David Parker - For the Calgary Herald
Tuesday, February 19, 2013

When Group2 Architecture and Quinn Young Architects merged in March 2012, the two Calgary staffs moved into the Quinn Young space on 2nd Street S.E. just south of ...[ CONTINUE READING ]
David Parker - For the Calgary Herald
Tuesday, February 19, 2013

When Group2 Architecture and Quinn Young Architects merged in March 2012, the two Calgary staffs moved into the Quinn Young space on 2nd Street S.E. just south of 62nd Avenue.

They were cramped and became more so as the company grew in size, but their move to new premises is complete and the 9,400 square feet the firm now occupies on the main floor of the Sam Livingston Building on the corner of 12th Avenue and 4th Street S.W. signals the complete integration of the two firms.

Group 2, now known as Group2 QYA Architecture Interior Design, has a companywide staff of 80, headquartered in Red Deer with other offices in Edmonton and Saskatoon. The Calgary studio employs 35 of those under the direction of principals and architects Susan Taff, who was an associate at 30-yearold Quinn Young since 2005, and Stacy Christensen who joined the Calgary office of Group 2 as an associate in 2009.The Sam Livingston building, a federal government property that formerly housed Canada Manpower, allowed QYA Group2 a large reception area and a meeting room large enough to accommodate clients and their consultants in discussing and showing interactive design proposals.



[ CLOSE ]


illumiNITE entry 2

Edmonton Studio 08 Feb 2013

Olivia, Heather, Carly from g2 along with Amy Wowk are building mygloo, a translucent mylar shell. The piece is “Inspired by an origami folding technique”. The “varying layers of mylar create levels of opacity that, when lit, highlight and crea...[ CONTINUE READING ]
Olivia, Heather, Carly from g2 along with Amy Wowk are building mygloo, a translucent mylar shell. The piece is “Inspired by an origami folding technique”. The “varying layers of mylar create levels of opacity that, when lit, highlight and create a glowing surface that piques the interst of passers-by”. Look for their piece under the spruce tree on feb 16 and 17.

illumiNITE is in its second year as an urban event that enlivens an underused pocket park on 104st and just north of Jasper Ave. It is put on by Edmonton on the Edge.This year the event is running for two days, and has both a judged portion, and people’s choice awards. [ CLOSE ]


illumiNITE entry 1

Edmonton Studio 08 Feb 2013

Bobby and Chris of g2 are building nostalgia in the form of a giant lite brite. They are expecting that its fun and interactivity will contribute to the atmosphere of illumiNITE 2013.

illumiNITE is in its second year as an urban event ...[ CONTINUE READING ]
Bobby and Chris of g2 are building nostalgia in the form of a giant lite brite. They are expecting that its fun and interactivity will contribute to the atmosphere of illumiNITE 2013.

illumiNITE is in its second year as an urban event that enlivens an underused pocket park on 104st and just north of Jasper Ave. This year it is running for two days, and has both a judged portion, and people’s choice awards. [ CLOSE ]


UrDu in Ottawa

Chris vander Hoek 08 Feb 2013

Last week, with the support of g2, I had a chance to exhibit one of our light installation pieces in Ottawa for winterlude - these are the details:

URban DiffUser. Version 2.

The project utilizes 450 repurposed floresce...[ CONTINUE READING ]
Last week, with the support of g2, I had a chance to exhibit one of our light installation pieces in Ottawa for winterlude - these are the details:

URban DiffUser. Version 2.

The project utilizes 450 repurposed florescent light diffusers and 240 LED 1w lights with a sound reactive controlling system. It is deployed in Ottawa in the Marion Dewar plaza for the illumiNation portion of the winterlude festival, and is one of 7 pieces done by artists from across Canada.

Working with Urban visuals (uvilab.com), we built on a system we deployed last year from the IllumiNite competition. (http://www.flickr.com/photos/75612718@N05/sets/72157629616241403/). That piece was the first use of the system of wrapping and stacking the individual lenses, and simply used big wall washer LED lights to give it life. That piece won the 2012 illumiNITE, with the praise of “sexy” from one of the judges, city councilor Jane Batty.

This years’ piece also uses commercial light diffusers from florescent lights – in this case mostly from an old Zellers. The material picks up light extremely well, but also happens to be quite fragile. This has proved to be a challenge to work with outside in the various weather conditions. In fact, immediately prior to winterlude, the temperature went from -15°c to +14°c and back down again over the span of 3 days. Despite this, the temperature change wasn’t the problem; it was the windstorm that accompanied the shift. The piece collapsed due to high winds, and ~10% of the pieces were damaged. This necessitated a return trip to Ottawa (from Montreal). After setting it back up again, in less ambitious form, and much better anchored, the piece came alive in time for the winterlude opening the following day.

The lighting system is constructed using 2 separate arduino boards, built into separate weatherproof enclosures. These take input from a small microphone, and push data down the string of 120 1w LEDs. The LEDs are capable of a wide spectrum of color (full RGB). Louder sounds make brighter light, and a change of color, which slides down the string to the end.

Overall, the project is a success, despite the collapse. The light system works tremendously well, and it reacts to sound generated by people, music and vehicles. After its 3 week run, the piece will be disassembled and shipped back to Edmonton.
[ CLOSE ]



IllumiNITE entries by staff at g2

Edmonton Studio 08 Feb 2013

2 teams have organized to submit pieces for the IllumiNITE festival in Edmonton on Feb 16-17. More details to follow....[ CONTINUE READING ]
2 teams have organized to submit pieces for the IllumiNITE festival in Edmonton on Feb 16-17. More details to follow. [ CLOSE ]


Meadows Rec Centre and Library Construction Update

Edmonton Studio 04 Feb 2013

Despite the snow and cold weather, construction has been moving ahead on the Meadows Recreation Centre and Library on the northeast corner of 17th Street and 23rd Avenue in Edmonton. You can see finish elements, such as the wood ceilings, emerge as t...[ CONTINUE READING ]
Despite the snow and cold weather, construction has been moving ahead on the Meadows Recreation Centre and Library on the northeast corner of 17th Street and 23rd Avenue in Edmonton. You can see finish elements, such as the wood ceilings, emerge as the interior spaces become protected by the expansive roofs. [ CLOSE ]





U of A PAW construction update

Edmonton Studio 04 Feb 2013

The construction for the Physical Activities and Wellness Centre at the University of Alberta is underway. Progress is being made through groundbreaking and demolition to make room for the new building....[ CONTINUE READING ]
The construction for the Physical Activities and Wellness Centre at the University of Alberta is underway. Progress is being made through groundbreaking and demolition to make room for the new building. [ CLOSE ]




Fabrication of 'my borealis' at Edmonton International Airport

Edmonton Studio 20 Dec 2012

Using grasshopper + Rhino for unique design under tight cost constraints.

With an original concept of a 'site responsive' aurora borealis, the design grew with a desire to create a unique piece that could serve as a landmark in the con...[ CONTINUE READING ]
Using grasshopper + Rhino for unique design under tight cost constraints.

With an original concept of a 'site responsive' aurora borealis, the design grew with a desire to create a unique piece that could serve as a landmark in the concourse of the Edmonton International Airport.

After exploring numerous materials to create the lit panels, we settled on an edge lit, scored acrylic panel. By using a local CNC operator to fabricate the piece, the labor and cost was kept to a minimum, while still allowing a unique piece.

Using a combination of Rhino with Grasshopper also allowed a significant time savings over an all 'manual' approach. Grasshopper is a plugin for Rhino, a 3d modelling software that started as an industrial design tool. It happens to be a fantastic fabrication tool as a result.

In this case, the process is extremely simple – using grasshopper, the cut lines were generated from segmenting an organizing curve into sections of randomized length. Those points were then used as start points for the cut lines - giving them a vector (y) and a randomized start and finish length. This allowed the entire design to be easily parametric; when the height of the panels changed, all the score lines could be adjusted by simply moving the curve to fit the new size.

The file was then transferred to the fabricator (Plastics Plus) who cut the panels and shipped them to have vinyl applied for the cityscape on the bottom (laser cut vinyl).

The fabrication process was an extremely simple application of grasshopper+Rhino, but resulted in a unique and interesting final product, achieved within a reasonable budget.
[ CLOSE ]






Alberta College of Art + Design for Show + Sale 2012

Calgary Studio 20 Nov 2012

ACAD's best student work in art, craft and design will be available for sale, and, new this year - Show + Show, guided tours of student exhibitions throughout the ACAD campus.

November 22 - 24, 2012
ACAD

Thursday ...[ CONTINUE READING ]
ACAD's best student work in art, craft and design will be available for sale, and, new this year - Show + Show, guided tours of student exhibitions throughout the ACAD campus.

November 22 - 24, 2012
ACAD

Thursday and Friday | 3:00 PM - 9:00 PM
Saturday | 11:00 AM - 5:00 PM

[ CLOSE ]


Edmonton Mature Neighbourhoods and Density

Edmonton Studio 09 Nov 2012

David Staples wrote this week how Edmonton might use narrow lots to go about increasing the density of it's mature neighbourhoods. http://bit.ly/PXgs2t This proposed solution looks very different than the pictures posted about a week earlier in the j...[ CONTINUE READING ]
David Staples wrote this week how Edmonton might use narrow lots to go about increasing the density of it's mature neighbourhoods. http://bit.ly/PXgs2t This proposed solution looks very different than the pictures posted about a week earlier in the journal. If you missed it, these were photos showing front facing suburban style garages, and they had Group2's Barry Johns quickly responding in the opinions page. http://bit.ly/RK2zCZ

First of all, the argument for density is made many times over by others, ie. http://www.urbandesign.org/density.html But it really hits home after the snowstorms this week, where more dense, walkable communities means fewer cars on the roads to idle in traffic and cause accidents.

A couple solutions presented by Tegan Martin-Drysdale of Red Brick are far from the suburban garage idea so feared by the neighbourhoods. She rightly points out that such housing types are not going be adopted overnight, but they are excellent precedents to start change in motion. her article can be found here: http://redbrickinc.ca/?p=120

One thing to add, would be to highlight the proximity and relationship of the living quarters to the street, and imagine how that changes the 'feel' of the street. In each of the precedents, the public areas, (or the areas where guests are welcome) are pushed to the front of the house, to fairly close proximity to the street. This gives a human face (perhaps literally) to the house, and thereby it increases safety by having more eyes on the street. This in turn influences how 'welcome' a neighbourhood feels – regardless of where the garage is.

photo credit:Greenfab via: redbrick [ CLOSE ]


UCAMA construction update

Edmonton Studio 09 Nov 2012

“Old ideas can sometimes use new buildings. New ideas must use old buildings.”

Jane Jacobs in the Death and Life of Great American Cities

The Ukrainian Canadian Archives & Museum of Alberta is a blend of both new an...[ CONTINUE READING ]
“Old ideas can sometimes use new buildings. New ideas must use old buildings.”

Jane Jacobs in the Death and Life of Great American Cities

The Ukrainian Canadian Archives & Museum of Alberta is a blend of both new and old, and nowhere will this be more evident than through the original brick walls. Unsurprisingly, a project re-purposing a building as old as this old hotel is a challenging proposition.

Commonly over time, buildings are adapted to new uses - windows are filled in, and walls are changed. Occasionally one has to be a detective, but the changes are often evident, even years after. One of many such changes to this building was where the basement was dug under the original hotel, long after it was built. As you might imagine, this did not enhance the structural integrity of the building. In fact, it made retaining one of the central brick walls very difficult. Adding to the degree of difficulty is that the wall was hollow, from the basement up to the roof - 4 floors above. The wall had actually functioned as a chimney, and was in poor shape.

The solution was to remove sections of the bricks, build in reinforcement and pour concrete. This had to be done one section at a time. If concrete was simply poured from the top, the pressure would blow out the brick at the bottom. Not to mention that the wall was no longer supported by the original structure. The Delnor crew (very safely) reinforced the wall back to the remainder of the building, and section by section, rebuilt the wall from the bottom, all the while filling it with concrete. The final result is a much stronger brick wall that will serve as the central corner to the new gallery spaces and be a feature at the main entrance.
[ CLOSE ]








Meadows Construction Update

Edmonton Studio 09 Nov 2012

The Toronto contingent from Perkins + Will has been in Edmonton recently – remaining involved in the regular reviews of the rapidly expanding structure on the south side of Edmonton. After some early challenges due to significant water presence on ...[ CONTINUE READING ]
The Toronto contingent from Perkins + Will has been in Edmonton recently – remaining involved in the regular reviews of the rapidly expanding structure on the south side of Edmonton. After some early challenges due to significant water presence on site, construction on the Meadows rec centre continues to move swiftly.

The exciting activity recently has been centred on lifting one of the main scuppers into place. Three cranes performed a precise ballet, coordinating to install the giant prefabricated piece and its supporting structure. The scupper, 18,000lbs, and large enough to stand in, will collect and direct all of the water from the green roof over the library.

All of the Glulam beams (laminated wood) are wrapped in white tarpaulin to protect them against damage and weather, but they will eventually be exposed, and will be visible to the interior as a visible expression of the structure.
[ CLOSE ]





Saskatchewan Parks & Recreation Association Annual Conference

Laura Plosz 28 Oct 2011

Last week, from October 20 – 22, I (Laura Plosz) attended the Saskatchewan Parks and Recreation Association (SPRA) Annual Conference held in Saskatoon. I participated in some great sessions focused on strengthening community networks and the impac...[ CONTINUE READING ]
Last week, from October 20 – 22, I (Laura Plosz) attended the Saskatchewan Parks and Recreation Association (SPRA) Annual Conference held in Saskatoon. I participated in some great sessions focused on strengthening community networks and the impact that the built environment has on childhood fitness and obesity rates. Also met some true community leaders from across the province - Swift Current, Moose Jaw, Radville, Regina, Saskatoon, North Battleford, Battleford, Kyle, Estevan and others.

New equipment that I liked - the Energi outdoor playground system – equipment that allows people to achieve a full body workout with the added benefit of accessing free video demos through smartphones. Combines 2 of my favorite things - fitness and technology.

[ CLOSE ]


Urban Experiment in Seville

Saskatoon Studio 11 May 2011

In Seville, Pedro Kok has created a video-narrative exclusively for Domus Metropol Parasol by Jürgen Mayer H.: a giant-scale structure that, like Santiago Calatrava’s nearby El Alamillo suspension bridge, emerges forcefully from the urban fabric. ...[ CONTINUE READING ]
In Seville, Pedro Kok has created a video-narrative exclusively for Domus Metropol Parasol by Jürgen Mayer H.: a giant-scale structure that, like Santiago Calatrava’s nearby El Alamillo suspension bridge, emerges forcefully from the urban fabric. According to Kok, Parasol is a kind of architectonic promenade that physically transports people over city rooftops, offering an unexpected point of view. He raised thousands of controversies among politicians and experts, but residents have successfully adopted it, rediscovering a square in the historic town which for years had been relegated to the parking. Check out the video at the link below. [ CLOSE ]


CISC Video on Sustainability

Edmonton Studio 29 Mar 2011

From the CISC Awards 2009 - Sustainability Category, this video features Triffo Hall at the University of Alberta, a building still being toured today which showcases its re-use of materials, specifically the steel structure....[ CONTINUE READING ]
From the CISC Awards 2009 - Sustainability Category, this video features Triffo Hall at the University of Alberta, a building still being toured today which showcases its re-use of materials, specifically the steel structure. [ CLOSE ]

Triffo Hall: Re-use of existing Steel
Triffo Hall: Re-use of existing Steel

Triffo Hall: Re-use of existing Steel
Triffo Hall: Re-use of existing Steel

Arch Record Building Types Study K-12 schools

Saskatoon Studio 04 Jan 2011

This month on Architectural Record's Building Types Study features K-12 schools. Very thought provoking interesting design work from all over the United States that exemplifies learning in the 21st Century....[ CONTINUE READING ]
This month on Architectural Record's Building Types Study features K-12 schools. Very thought provoking interesting design work from all over the United States that exemplifies learning in the 21st Century. [ CLOSE ]

Landry High School - Eskew Dumez Ripple
Landry High School - Eskew Dumez Ripple

Landry High School - Eskew Dumez Ripple
Landry High School - Eskew Dumez Ripple

Modern Christmas Tree

Saskatoon Studio 29 Nov 2010

Ever thought of making a sustainable reusable Christmas tree out of a sheet of plywood?? Well Build LLC has - check out their most recent post on the Build blog....[ CONTINUE READING ]
Ever thought of making a sustainable reusable Christmas tree out of a sheet of plywood?? Well Build LLC has - check out their most recent post on the Build blog. [ CLOSE ]


Group2 in the news - 20 Years of "A Better World"

Edmonton Studio 02 Nov 2010

This article providing information about "A Better World" and the support it provides marks 20 of service for the charity organization. Group2 has been consistently involved in the many projects in Africa over the last 5 years, donating both architec...[ CONTINUE READING ]
This article providing information about "A Better World" and the support it provides marks 20 of service for the charity organization. Group2 has been consistently involved in the many projects in Africa over the last 5 years, donating both architectural services and funding to build a better life for people in Africa. [ CLOSE ]


National Code Publications Released

Edmonton Studio 25 Oct 2010

The National Building Code, National Fire Code, and National Plumbing Code are scheduled for publication in November 2010, incorporating over 800 technical changes. It looks like the 2011 NECB will be 25% better than the 1997 code....[ CONTINUE READING ]
The National Building Code, National Fire Code, and National Plumbing Code are scheduled for publication in November 2010, incorporating over 800 technical changes. It looks like the 2011 NECB will be 25% better than the 1997 code. [ CLOSE ]


MADE in Edmonton celebrates 10 Years!!!!!!!!!

Edmonton Studio 14 Oct 2010

M.A.D.E. in Edmonton will kick off Edmonton Design Exposed (EDE) with an opening reception showcasing a retrospective exhibit of the last decade of M.A.D.E. events at the Art Gallery of Alberta on October 14 2010. They will be exhibiting all things M...[ CONTINUE READING ]
M.A.D.E. in Edmonton will kick off Edmonton Design Exposed (EDE) with an opening reception showcasing a retrospective exhibit of the last decade of M.A.D.E. events at the Art Gallery of Alberta on October 14 2010. They will be exhibiting all things M.A.D.E., including an expansive display of the past film screenings, exhibitions, symposiums, street furniture competitions, and, of course, lectures. Join MADE as they reminisce about how this volunteer group has evolved since its inception, and how Edmonton has evolved and changed simultaneously. [ CLOSE ]


Group2’s Row4Kids Team a success!

Edmonton Studio 17 Sep 2010

Congratulations to our Row4Kids team, G2^3, who managed to raise a grand total of $6235.00 for the Stollery Children’s Hospital Foundation! After 8 weeks of training and fundraising, we gave the other boats a run for their money on race day, which...[ CONTINUE READING ]
Congratulations to our Row4Kids team, G2^3, who managed to raise a grand total of $6235.00 for the Stollery Children’s Hospital Foundation! After 8 weeks of training and fundraising, we gave the other boats a run for their money on race day, which took place at Telford Lake in Leduc, Alberta, on Sept. 11. Though the weather was a little chilly, we had a great time and managed to hold our own against the more experienced crews. Thank you to everyone on the team for all your hard work, and to everyone that contributed to our fundraising efforts. See you again next year!
[ CLOSE ]


Update: Group2’s Row4Kids Team

Edmonton Studio 31 Aug 2010

Our Row4Kids team is now almost through our training sessions and we are poised to give the other competitors a run for their money on race-day, which is coming up quickly on September 11! So far we have raised $1500 toward our minimum goal of $2500...[ CONTINUE READING ]
Our Row4Kids team is now almost through our training sessions and we are poised to give the other competitors a run for their money on race-day, which is coming up quickly on September 11! So far we have raised $1500 toward our minimum goal of $2500, and we are still looking for further donations. If you would like to donate money, please visit the Row4Kids website, and pledge one of the participants on our team. The link is below, and our team name is G2^3 (Group2). All money raised will go to the Stollery Children’s Hospital Foundation and the Edmonton Rowing Club.
[ CLOSE ]


Group2 Participating in Row4Kids Event

Edmonton Studio 21 Jul 2010

Group2 has put together a team to participate in the annual Edmonton Row4Kids event; a unique fundraiser for the Stollery Children’s Hospital Foundation. For 8 weeks the team will work together to learn and master the skills of sweep rowing, while...[ CONTINUE READING ]
Group2 has put together a team to participate in the annual Edmonton Row4Kids event; a unique fundraiser for the Stollery Children’s Hospital Foundation. For 8 weeks the team will work together to learn and master the skills of sweep rowing, while raising funds to support the hospital’s research and facility enhancements, continuous improvements in technology, and state-of-the-art pediatric care. The training will culminate in a final race day regatta on Sept. 11, 2010, where crews from around the city will put their abilities to the test to see who has the fastest boat. For every $1,000 raised for the Stollery Children’s Hospital, 3 seconds will be deducted from our team’s race time, so the more money collected the faster we will be!

Watch for updates on our training and fundraising. If you wish to make a donation to the event, please contact Eleanor Hopkins in the Edmonton Studio (eleanorh@group2.ca).
[ CLOSE ]


Smith-Plosz house featured in the Edmonton Journal

Edmonton Studio 19 Jul 2010

Laura Plosz and Troy Smith’s bungalow was recently featured as one of three originally-identical 1950’s homes in the Edmonton Journal. The current form of their house is somewhere between the other two featured, one with a complete overhaul of t...[ CONTINUE READING ]
Laura Plosz and Troy Smith’s bungalow was recently featured as one of three originally-identical 1950’s homes in the Edmonton Journal. The current form of their house is somewhere between the other two featured, one with a complete overhaul of the main living areas and the other almost original. Several photographs of each house are available through the ‘photos’ tab at the top of the Journal article. [ CLOSE ]

Laura Plosz in front of their Edmonton home
Laura Plosz in front of their Edmonton home

Laura Plosz in front of their Edmonton home
Laura Plosz in front of their Edmonton home

MasterFormat 2004 has been updated.

Edmonton Studio 22 Jun 2010

MasterFormatTM is a master list of numbers and associated titles classified by work results used to organize specifications (ex. 04 20 00-Unit Masonry). It was created by Construction Specifications Canada and the Construction Specifications Institu...[ CONTINUE READING ]
MasterFormatTM is a master list of numbers and associated titles classified by work results used to organize specifications (ex. 04 20 00-Unit Masonry). It was created by Construction Specifications Canada and the Construction Specifications Institute (USA).

Recently, MasterFormat 2004 has been updated. Major changes include an entirely new division (Division 46–Water and Wastewater Equipment), revisions to Division 44–Pollution and Waste Control Equipment, and sections related to polished concrete.

The changes found in MasterFormat 2010 Update are the first under a new annual revision cycle that incorporates suggestions by design/construction professionals.

Steve Londry, Specifications Writer
[ CLOSE ]


13th Annual Sustainable Building Symposium

Edmonton Studio 27 May 2010

The 13th Annual Sustainable Building Symposium was held in Edmonton on May 11&12, and in Calgary on May12 &13. As an Intern Architect from the Edmonton Studio, I attended the Edmonton session as a volunteer, and was privileged to experience a well-r...[ CONTINUE READING ]
The 13th Annual Sustainable Building Symposium was held in Edmonton on May 11&12, and in Calgary on May12 &13. As an Intern Architect from the Edmonton Studio, I attended the Edmonton session as a volunteer, and was privileged to experience a well-run event that included engaging and informative presentations from leaders in the field of sustainable design. It was also a great opportunity to network with like-minded individuals, and be energized by new ideas about up-coming technologies, strategies, and emerging paradigms in ‘green’ building. The kick-start to the symposium was the innovative keynote address by Jay Ingram (of Discovery Channel fame) in conjunction with the band ‘The Turbines’ from Calgary. They delivered a musically inspired message that set the tone for the remainder of the program. It was a great experience, and I would encourage participation in next year’s event either as a delegate, speaker, or volunteer!

Eleanor Hopkins, Intern Architect [ CLOSE ]


LEED Materials : A Resource Guide to Green Building Book

Troy Smith 03 May 2010

New book published by Princeton Architectural Press on LEED and building materials and how different building material relates to specific credits and how much each material can contribute to your overall point total....[ CONTINUE READING ]
New book published by Princeton Architectural Press on LEED and building materials and how different building material relates to specific credits and how much each material can contribute to your overall point total. [ CLOSE ]


Active Transportation in Copenhagen - Video

Edmonton Studio 06 Apr 2010

Don't be daunted by the length of the video or the long introductions - the meat of the presentation is very good. I can only imagine (with glee) the day when we are talking about similar numbers for cyclists in Canadian cities. It also hit home th...[ CONTINUE READING ]
Don't be daunted by the length of the video or the long introductions - the meat of the presentation is very good. I can only imagine (with glee) the day when we are talking about similar numbers for cyclists in Canadian cities. It also hit home the importance out of creating 'events' for urban initiatives such as active transportation - it is a truly effective way to get the media involved which in turn draws the politicians. [ CLOSE ]


Active School Travel Project Goes Nationwide

Laura Plosz 05 Apr 2010

Green Communities Canada announced today the national expansion of a project that makes it safer for students to use active transportation methods like walking and cycling to travel to and from school. Funding of $2.1 million from the Canadian Partne...[ CONTINUE READING ]
Green Communities Canada announced today the national expansion of a project that makes it safer for students to use active transportation methods like walking and cycling to travel to and from school. Funding of $2.1 million from the Canadian Partnership Against Cancer and the Public Health Agency of Canada will enable School Travel Planning (STP) to reach 120 schools, resulting in healthier, happier students and reducing the incidence of chronic disease.


[ CLOSE ]


Seattle Design/build Firm - BUILD LLC

Troy Smith 05 Apr 2010

Seattle design/build firm BUILD LLC has a great blog that is updated twice a week. They blog about overall design culture that is affecting and influencing their work but they also show off their work and attempt to demystify the hiring of an archit...[ CONTINUE READING ]
Seattle design/build firm BUILD LLC has a great blog that is updated twice a week. They blog about overall design culture that is affecting and influencing their work but they also show off their work and attempt to demystify the hiring of an architect and the design/build process that they take each client through. They design, build and have their own custom cabinet shop that does well crafted simple millwork. There are some great posts on the 'Process of Architecture' and a 'Construction Cost Cheat Sheet' - check it out. [ CLOSE ]

BUILD cabinet shop - wine rack
BUILD cabinet shop - wine rack

BUILD cabinet shop - wine rack
BUILD cabinet shop - wine rack

TRANSPORTATION POLICIES AND LEED

Laura Plosz 01 Apr 2010

A great article at Planetizen on how the reforming of transportation policies can have a great impact on Sustainable Development than LEED Certification. ...[ CONTINUE READING ]
A great article at Planetizen on how the reforming of transportation policies can have a great impact on Sustainable Development than LEED Certification. [ CLOSE ]




Group2 Architecture Interior Design Ltd.
Site designed & built by Vanguard Works © 2009. All Rights Reserved.